🔥 Limited onboarding slots available this month — setup starts within 2 business days of purchase.
For Fire Protection Contractors — Solo Operators & Small Shops

Stop Waiting 3 Weeks
to Get Paid for Work
You Already Did.

Get from completed job to cash in the bank
in 48 hours — without a single phone call or piece of paper.

Your techs finish the job. The paperwork sits in a truck. Someone in the office re-types it into an invoice. Three phone calls happen to chase missing info. You wait. We fix all of that for you — completely set up, configured, and your team trained — so you can close your laptop on Friday and actually enjoy your weekend.

GET STARTED NOW — $1,949 No Sales Call · Setup Starts Within 2 Business Days
30-Day Team Adoption Guarantee — or we keep working for free

For Most Fire Protection Contractors, the Invoice is the Bottleneck

"You don't have a speed problem. You have a system problem. And we fix it for you."

The Operators Who Switched
Never Looked Back

★★★★★
Verified Fire Protection Contractor
"I used to spend every Sunday evening catching up on invoices from the week. Now my techs scan the job on-site and the invoice goes out automatically. I got paid on Thursday for a job my guy finished Tuesday morning. That used to take three weeks."
Solo Operator, Midwest — 2-truck fire inspection business
★★★★★
Verified Fire Protection Contractor
"We had tried two other platforms and my guys just went back to paper. FSW actually came in, set everything up, and ran training for all four of my techs. Six weeks in, nobody's touched a paper report. The cash flow difference is night and day."
Shop Owner, 4 Techs — commercial fire suppression contractor

We Do the Hard Part.
You Just Show Up to Work.

This isn't software you buy and figure out. We build it, configure every workflow, and train every tech on your team — from start to go-live.

01
Done For You

Data Migration & Account Setup

  • Full platform build-out configured for your specific business
  • All existing asset and device data onboarded into the system
  • QR codes generated and assigned to your entire equipment inventory
  • Your account is ready to use on day one — zero DIY required
02
Done For You

Custom Reports & Automated Invoice Workflow

  • Digital field report templates built to match your existing paper forms exactly
  • Job-to-invoice workflow configured so completed jobs trigger invoices automatically
  • Payment processing connected and tested end-to-end
  • No manual re-entry. No missing info. No follow-up calls.
03
Done With You

Full Team Onboarding & Go-Live

  • Live Google Meet training sessions for every tech on your team
  • Unlimited on-demand support sessions schedulable in-app for 90 days
  • Owner walked through the dashboard, reporting, and day-to-day workflow
  • We stay with you until every tech is confident and actually using it in the field

"Go from completed job to paid invoice in 48 hours — without chasing your techs or touching a single piece of paper — so you can close your laptop on Friday and actually enjoy your weekend."


Two Options. Both Include
Done-For-You Setup.

Pick based on how much ongoing hand-holding you want after go-live.

🥈 Most Popular — Core Offer
The Install

"We Set It All Up For You + Train Your Entire Team, You Just Show Up To Work"

$1,949
one-time setup + $49/month platform access
Most owners recover the full setup cost within the first billing cycle — just by getting paid faster.

Everything Included

  • Full platform build-out & data migration — done for you, completely
  • Custom digital field report templates matching your existing paper forms
  • Automated job-to-invoice workflow configured and tested end-to-end
  • QR asset tracking setup for your full equipment inventory
  • Live Google Meet team training sessions for every tech
  • Unlimited on-demand support for 90 days, schedulable in-app
  • Payment processing connected and fully operational
🛡️

30-Day Team Adoption Guarantee: If your team isn't actively using the platform in the field within 30 days of go-live, we keep working with you at no extra cost until they are. You don't pay for software your team won't use — we make sure that doesn't happen.

★★★★★
Verified Fire Protection Contractor
"The setup took less than a week. My office admin stopped doing manual data entry completely. We went from invoicing 3 weeks after a job to same-day. I genuinely didn't think my guys would stick with it — but they did because it's easier than paper."
Small Shop Owner, 3 Techs — sprinkler inspection & testing
🥇 Premium — Extended Support
The Full Shift

"Everything In The Install + 6 Months of Unlimited Support + Growth Tools Unlocked"

$2,949
one-time — or $597 × 6 monthly payments + $49/month
Best for shop owners who want six months of hand-holding and early access to FSW's AI growth tools at locked-in pricing.

Everything in The Install, Plus

  • 6 months of unlimited on-demand Google Meet support (vs. 90 days)
  • Monthly 1-on-1 strategy session reviewing your workflow and efficiency
  • Priority support queue — jump the line on every request
  • Early access to FSW AI growth tools (lead gen, local visibility) at member pricing
🛡️

6-Month Invoice Guarantee: We work with you for 6 full months until your job-to-invoice cycle is consistently under 48 hours. If we're not there yet — we keep going.


Built for the Operator Who's Done
Fighting Paperwork

🔧

Solo Contractor

You run everything yourself — inspections, invoicing, scheduling. You need the admin side on autopilot.

👷

Small Shop (2–5 Techs)

Techs in the field, office behind. The gap between job done and invoice sent is costing you every week.

📋

Paper-to-Invoice Bottleneck

You know exactly where the delay is. You've just never had someone set up the fix for you — until now.

💸

Cash Flow Strain

Paying techs weekly but waiting 3 weeks to get paid. That gap needs to close — and it can.

⚠️ This is not for you if you're already fully digital, invoicing same-day, and your team is consistently using field software. You're ahead. If that's not you — the fix is right above.

Your Purchase Is Backed By Our
Unconditional 30-Day Guarantee

Before you buy anything, I want you to know exactly what you're getting — and I want you to feel completely comfortable with this decision.

Here's the thing: we've seen too many fire protection contractors buy software that their team never adopts. That's not a you problem — that's an implementation problem. And it's exactly what we solve.

So here's what I've put in place. Get Started, let us set everything up, go through the onboarding with your team, and start using the platform in the field.

If your team isn't actively using it within 30 days of go-live — just email us. We'll keep working with you at no extra charge until they are.

We don't consider the job done until your techs are actually using it in the field and your invoices are going out faster. That's the standard we hold ourselves to.

🛡️

30-Day Team Adoption Guarantee

We work until your team is using it, consistently, in the field. No extra charge. No excuses.


You're Probably Wondering…

"I've tried software before. My guys just won't use it." +
That's the most common thing we hear — and it's exactly why The Install includes live team training for every tech on your crew, plus 90 days of unlimited on-demand support. We don't hand you a login and disappear. We train your team until they're comfortable, and we back it with a 30-day adoption guarantee. If they're not using it, we keep working for free until they are.
"I don't have time to learn a new system." +
You don't have to learn it — we build it for you. We handle the setup, data migration, report templates, and workflow configuration. You show up to the onboarding call, we walk you through what we built, and you're ready. The only thing you need to learn is the dashboard — and we do that live with you.
"Is $1,949 worth it for my size of shop?" +
Think about it this way: if you're billing $15–20K a month and cash is arriving three weeks late, you're running on a permanent cash flow deficit. Getting paid in 48 hours instead of three weeks changes how you run the entire business. Most owners recover the full setup cost within the first billing cycle — just from the cash flow improvement alone.
"What if I'm already using some other software?" +
We integrate with common calendars, email, and CRM systems, and support easy imports from spreadsheets. During onboarding we assess what you're already using, connect what makes sense, and replace what doesn't. You don't have to tear anything down to start.
"How long does the setup actually take?" +
Setup starts within 2 business days of purchase. Most accounts are fully built and your team is trained within 7–10 business days. The 90-day support window starts at go-live, so you have plenty of runway to get fully confident.

Start Here. Scale From Here.

The Install is your foundation. As your business grows, the FSW ecosystem grows with you — more tools, more support, more automation.

Trial
The Field Test
$97/mo
Platform access + monthly group onboarding call. Try before committing. Cancel anytime.
Start Here Core
The Install
$1,949 + $49/mo
Full done-for-you setup, custom workflows, team training, 90-day support. Fastest path to 48-hour invoicing.
Premium
The Full Shift
$2,949 + $49/mo
Everything in The Install + 6 months support + monthly strategy sessions + AI growth tools unlocked.
White Glove
The Operator System
$7,500 + $49/mo
For existing clients ready to systemize growth. AI lead gen, local SEO, recurring pipeline. Application only.

Stop Waiting Weeks to Get Paid
for Work You Already Did

No sales call. No complicated onboarding. We build it, configure it, and train your team. You run jobs the way you always have — except the money arrives 48 hours later instead of three weeks.

GET STARTED — $1,949 30-Day Guarantee · No Sales Call · Setup in 2 Days
Or get The Full Shift with 6 months support — $2,949 →